DOUBLE/TRIPLE ECCENTRIC BUTTERFLY VALVE
TYPE: Z2M-K/Z3M-K DN50-600
1. Application range
Nominal pressure:
PN 1,6 MPa
Body max test pressure:
PT: 2,4 MPa
Seat max test pressure:
PT: 1,76 MPa
Maximum allowable temperature:
TMA: 425°C
Tightness testing pressure
(gas test according to PN-EN 12266-1); PT: 0,6 MPa
Maximum allowable working pressure PMA at related maximum allowable temperature TMA
CLICK ON IMAGE TO ZOOM
2. Basic materials
Body, disc:
cast carbon steel GP240GH (1.0619)
Lamella:
austenitic stainless steel alloyed X5CrNi18-10 (1.4301)
Stem:
stainless steel X20Cr13 (1.4021)
Gaskets:
graphite + 1.4301
Bolts/ nuts:
alloy hardened steel A193 B7/carbon hardened steel A194 2H
Optional material design:
body made of acid resistant cast steel GX5CrNiMo19-11-2 (1.4408)
3. Design
Connection:
flanged DN50 - DN600
lug, wafer DN50-DN600
butt weld ends S 2" - S 24" at the client's request flanges acc. to AINSI at the client's request
Drive type:
standard version with a worm gear
optional version
with a hand level (from DN50-DN100)
with an electric drive AUMA or another one indicated by ther client
Tightness class:
in standard 100% in the same direction, opposite direction 50% PN
Any requests about 100% tightness in both directions should be always discussed with our technical and sales department.
4. Characteristics
Butterfly valves are designed for general use pipelines in industrial systems, for the second group of fluids. They are designed to cut off as well as control the flow of drinking and industrial water, steam, air. They are also used in the power industry, heat engineering, chemical industry (for non aggressive and non toxic liquid and gas substances), petrochemical and refinery industries, coke and chemical industry (coke-oven gas). They can be installed on pipelines in any position.
5. Requirements and testing
Flanges connecting sizes acc. to PN-EN 1092-1.
Face to face acc. to PN-EN 558-1.
Pressure testing acc. to PN-EN 12266-1.
Certificate of conformity in acc. with PN-EN 10204.
Design to PN-EN 12516-2.
Valves have been submitted for appraisal of conformity according to the directive Pressure Equipment Directive 97/23/EC.
6. Directions for ordering
When giving your order you should supply the following information:
medium,
the maximum operating pressure,
the maximum operating temperature,
type and size of connections.
7. Additional information
24 months warranty compulsory acc. to the conditions which are in the manufacturer's warranty card.
The manufacturer is able to undertake inspections and repairs of the fittings as well as replacement of the internal elements if required.
All the requirements concerning the quality and technical specifications of the fittings should be taken into consideration in your order. With the fittings we provide specification sheets (technical and quality) as follows: standard - conformity declaration, Installation, Operation and Maintenance Manual, at the client's request - certificate 2.2 or 3.1.
We reserve the right to introduce some technical changes without notice.
|
