XnRnXZvLpO zamkon.pl

WZU PN 16

CAST IRON BALL FLOAT STEAM TRAP REVERSIBLE, WITH THERMOSTATIC (BIMETALLIC) AIR VENT TYPE: WZU Tmax: 300oC  PN16  DN15-50   CLICK ON IMAGE TO ZOOM Main dimensions CLICK ON IMAGE TO ZOOM Capacity chart   CLICK ON IMAGE TO ZOOM 1. Application range Maximum allowable pressure: PMA: 1,3 MPa Maximum allowable temperature: TMA: 300°C Maximum differential pressure: Δp = 1,3 MPa Tightness testing pressure: (gas test according to PN-EN 26948): PT:  0,6 MPa Maximum allowable pressure  PMA at related maximum allowable temperature TMA CLICK ON IMAGE TO ZOOM   2. Basic materials Body, cover (Fig., items 1,2): grey cast iron EN-GJL-250 (GG 25) Drain plug (Fig., item 3): steel G35 (1.0501) Ball float and valve assembly (item 4): stainless steel Cover bolt (Fig., item 5): steel St52-3 (1.0570) Nut, plug gasket (Fig., items 6,10): asbestos free Valve gasket (Fig., item 9): copper Anticorrosion coating: standard version: zinc plated optional version: nickel or chrome plating   3. Design Connections: flanged DN15 - DN50, face type B1 acc. to PN-EN 1092-2   Installation: vertical - standard version optional version - horizontal with right or left hand side flow There is the possibility to change the installation mode.   4. Characteristics Ball float steam traps with a level regulator are used to automatically drain power equipment and steam pipe lines of all types. Float regulators which are used in them can be characterised by high water hammer resistance and additional thermal regulators serve to self-vent at start-up. The construction of the steam trap allows for the replacement of regulation parts without dismantling the body from the network.   5. Requirements and testing Flanges connecting sizes acc. to PN-EN 1092-2. Face to face acc. to PN-EN 26554. Design acc. to WUDT-UC-WO-D. Manufacturing acc. to WUDT-UC-WO-W. Pressure testing acc. to PN-EN 26948. Certificate of conformity in acc. with PN-EN 10204. Steam traps have been submitted for appraisal of conformity according to the Pressure Equipment Directive 97/23/EC.   6. Directions for ordering When giving your order you should supply the following information: the maximum differential pressure of the steam trap Δpmax, the maximum operating pressure, the maximum flow of the condensate through the steam trap Q max, the maximum operating temperature, type and size of the connections.   7. Additional information 24 months warranty compulsory acc. to the conditions which are in the manufacturer's warranty card. The manufacturer is able to undertake inspections and  repairs of the fittings as well as replacement of the internal elements if required. All the requirements concerning the quality and technical specifications of the fittings should be taken into consideration in your order. With the fittings we provide  specification sheets (technical and quality) as follows:  standard - conformity declaration, Installation, Operation and Maintenance Manual, at the client's request - certificate 2.2 or 3.1.   We reserve the right to introduce some technical changes without notice.