XnRnXZvLpO zamkon.pl

Air vent for liquid

AIR VENT FOR LIQUID TYPE: OZP-1 PN10   DN15-25   Main Dimensions Click on image to zoom   Capacity chart Click on image to zoom 1. Application range Nominal pressure: PN 1,0 MPa Maximum allowable/testing pressure: PMA/PT: 0,8/1,2 MPa Maximum allowable temperature: TMA: 200°C Tightness testing pressure            (gas test according to PN-EN 26948): PT:  0,6 MPa Tightness testing at negative pressure: Pv: - 0,08 MPa 2. Basic materials Body, cover: forged carbon steel P250GH (C22.8) Anticorrosion coating: standard version: zinc plated optional version: nickel or chrome plating Internal parts: acid resistant high-alloy steel Nozzle and needle: hardened stainless steel (hardness ~60 HRC) 3. Design Connections: flanged DN15 - DN25, face type B1 acc. To PN-EN 1092-1 screwed Rp 1/2" - Rp 1" flanged DN32-50 at the client's request flanges acc. to ANSI (Cl150 up to DN25) at the client's request 4. Characteristics Vents are used for venting (degassing) apparatus as well as water system pipes, oil system pipes, etc. The flow of the mixture of liquid and gas flows in via the K1 socket to the cumulative chamber. Gas accumulates at the top of the chamber. The low level of the liquid results in the dropping of the float. It causes the opening of the needle valve and gas extraction via the K2 socket outside the vent. Once the level of the liquid rises again the float lifts and the needle valve closes. The vent should be installed only in the position shown on the drawing (according to the flow direction marked on the vent). 5. Requirements and testing Flanges connecting sizes acc. to PN-EN 1092-1; (DIN; ANSI/ASTM). Face to face acc. to the table. Pressure testing acc. to PN-EN 12266. Certificate of conformity in acc. with PN-EN 10204. Design acc. to WUDT-UC-WO-D. Manufacturing acc. to WUDT-UC-WO-W. Vents have been submitted for appraisal of conformity according to the Pressure Equipment Directive 97/23/EC. 6. Directions for ordering When giving your order you should supply the following information: medium, the maximum operating pressure, the maximum operating temperature, type and size of the connections. 7.    Additional information 24 months warranty compulsory acc. to the conditions which are in the manufacturer's warranty card. The manufacturer is able to undertake inspections and  repairs of the fittings as well as replacement of the internal elements if required. All the requirements concerning the quality and technical specifications of the fittings should be taken into consideration in your order. With the fittings we provide  specification sheets (technical and quality) as follows: standard - conformity declaration, Installation, Operation and Maintenance Manual, at the client's request - certificate 2.2 or 3.1. We reserve  the right to introduce some technical changes without notice.