1. Main materials
Shell/heads/tubes: P235GH boiler steel
Flanges: forged carbon steel
Valve and float mechanism: cast steel / carbon steel
Check valve (optional equipment): forged carbon steel body (P250GH), stainless steel disc (X6CrNiMoTi17-12-2)
2. Construction
Main connections: flanged with B1 facing
Other connections: DN25-DN80 on request
Optional construction: with check valve
The trap has no overpressure protection. Protective devices must be installed at the working media supply source.
3. Description
The equipment transports or lifts condensate (water) to higher levels using a motive medium, for example from a ground-level tank to an elevated pipeline or tanks at higher levels. It can replace conventional motor-driven pumps; use in Ex zones is recommended. When the installation starts, condensate enters the trap through the inlet connection (e.g. from a condensate tank, steam tracing traps or heat exchangers; the vent valve is open and the steam valve closed), raising the float. Above the maximum float level the valves switch: the vent valve closes and the steam valve opens. Higher-pressure steam pushes condensate through the outlet connection into the pipeline, overcoming the outlet check valve force. The inlet check valve prevents condensate returning to the inlet pipeline. At the minimum float level the valves switch again and the cycle repeats. Maintaining a minimum condensate level above the outlet connection prevents steam entering the outlet pipeline, forming a water seal. The condensate outlet check valve prevents condensate returning to the equipment during its filling cycle.
Downloads



